Pull the rubber/vinyl strip off the edge like this. At the left corner of the windshield, where the plastic piece is, lift up at that corner. Pull back this piece. It's stuck in a groove below the glass. Find the cable retaining plug like this. Reach in a grab it from behind like this. It pulls out all the way like this. It may require a stiff pull, to get it back all the way. Do the same on the other side. The connectors come off the ECU easily. Then push them out of the way to remove the ECU. Reverse this proceedure, making sure the connectors are seated all the way back, and the tab is pushed in all the way.

Print Page

Close Window

By Jeff Bipes