Coil Pak Replacement in the TT


This is for the TT AMU engine (or similar) that has the 2 mounitng bolts per pak.

"Coil Paks" (Item 7)

You will need a 5mm Ball end allen wrench, and a 5mm socket-end. (for Item #8)

You will have to twist the pak to get it to come out from under all the wiring loom, etc.

The first two are easy, the next two require that you remove the support bracket for all the plumbing.

Teh bracket here under all this plumbing.

This bolt is 12mm.

Squeeze this retainer clip to remove this connector.

You can then easily move all the plumbing stuff out of the way.

Installation is reverse.


By Jeff Bipes